Mk-products Python Rev.D Bedienungsanleitung PDF herunterladen (Seite 9)

Python Owner's Manual - Page 2





A #2 AWG power cable is used on the Python

air cooled torch. The torch

end is threaded into the torch body. The power cable tting connects to the

power block in the Cobramatic

wire feed cabinet.



Python

water cooled torch utilizes a power/water cable with a #4 AWG cable

inside a 5/8” (16MM) diameter hose. When water is used with this cable and

the #10 water cooled gas cup (P/N 621-0065), the system is rated at 400

amps @ 100% duty cycle.



The Python

torch comes standard with a poly-lined conduit, for feeding

aluminum wire. The longer tting with a shallow groove is used on the torch

end. A set screw located on top of the torch handle secures the conduit in

place.



The gas hose is secured over the barbed gas tting with a tie wrap. The

cabinet end of the gas hose uses our standard gas tting (1/8” - 27 nps).



If so equipped; one end of the water hose is secured over the barbed water

tting with a tie wrap and the other end is connected to the center tting

on the power block.



A seven conductor control cable is used on the Python

torch. The torch end

of the control cable is secured to the torch with a boot clamp and soldered

into the pot assembly and micro switch connectors. Slack is left in the

electric cable as it exits the back of the torch to prevent cable breakage. The

cabinet end has a seven pin “W” clocked amphenol connector.

 



The Python

torch maintains a constant, steady, uniform wire feed speed,

regardless of curved or looped wire conduit. The constant push exerted by

the slave motor in the cabinet, combined with the pull of the torch motor,

causes the wire to literally oat friction-free through the wire conduit. The

24VDC torch motor is controlled by a three and three-quarter (3 3/4) turn

potentiometer in the torch handle.





The laterally-positioned potentiometer is located in the lower end of the

handle, providing up to 800 ipm with 3 3/4 turns.



The micro switch assembly consists of the micro switch, and leads.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 39 40

Kommentare zu diesen Handbüchern

Keine Kommentare

Mk-products Python Rev.D Bedienungsanleitung Seite 9

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Ausrüstung Mk-products Python Rev.D